Intelligent Charging originally designed this product for a specific need of the British Army, and we are now able to offer the SBSC11Q for both military and commercial use.
Channels and Battery Range:
The SBSC11Q is a battery charger designed to simultaneously charge up to four SBSC11 sealed lead acid batteries or other SBS type batteries having a nominal voltage of 12.0V
Charge:
Automatic Bulk charge to 14.4V at maximum current of 9.0A switching to float charge at 13.74V
Controls and Metering:
Battery charge control is simply via STOP/START push buttons, allowing battery interchange without the need to remove power from the unit or connecting/disconnecting live output.
Many other advanced features can be seen on the product details below.
Product Details for SBSC11Q
- The SBSC11Q is a battery charger designed to simultaneously charge up to four SBSC11 sealed lead acid batteries or other SBS type batteries having a nominal voltage of 12.0V
- Automatic Bulk charge to 14.4V at maximum current of 9.0A switching to float charge at 13.74V
- Battery charge control is simply via STOP/START push buttons, allowing battery interchange without the need to remove power from the unit or connecting/disconnecting live output
- 10.0A Resettable circuit breakers are fitted to each battery connection to protect both the battery and the unit from short circuits or faults
- The unit is reverse connection protected and will show an error condition if START is pressed while battery reverse connection is made
- The unit detects non battery connection and will show an error if less than 0.8V is detected at the battery terminals
- The unit will automatically perform a desulphation charge if a battery connected exhibits a terminal voltage less than 9.0V
- Battery volts / amps and time is displayed on a three digit red 7 segment display
- Display and Indicators brightness can be controlled from dim to very bright so display can be seen in daylight conditions
- Clear indication of Bulk Charge, Trickle Charge, Desulphation Charge and Error conditions
- 12kg (26lbs)
- L. 37.3cm x W. 21.9cm x H. 24.5cm (L. 14.7 x W. 8.6 x H. 9.6 Inches)
- The unit accepts a universal mains input of 80-264 VAC/47-63 Hz
- The battery connecting lead is made via a non reversible 2 pin 50A connector
- The unit is supplied with 2 lead sets per channel, 1 fitted with 8.0mm crimp terminals for connection to the SBSC11 battery, the other with crocodile or alligator clamps.
- 1 Year RTB Warranty
- Field calibration possible, no need to return the unit back to factory for calibration