SBSC11Q

 

Intelligent Charging originally designed this product for a specific need of the British Army, and we are now able to offer the SBSC11Q for both military and commercial use.

Channels and Battery Range:
The SBSC11Q is a battery charger designed to simultaneously charge up to four SBSC11 sealed lead acid batteries or other SBS type batteries having a nominal voltage of 12.0V

Charge:
Automatic Bulk charge to 14.4V at maximum current of 9.0A switching to float charge at 13.74V

Controls and Metering:
Battery charge control is simply via STOP/START push buttons, allowing battery interchange without the need to remove power from the unit or connecting/disconnecting live output.

Many other advanced features can be seen on the product details below.

Data Sheet
Operators Manual

Product Details for SBSC11Q

  • The SBSC11Q is a battery charger designed to simultaneously charge up to four SBSC11 sealed lead acid batteries or other SBS type batteries having a nominal voltage of 12.0V
  • Automatic Bulk charge to 14.4V at maximum current of 9.0A switching to float charge at 13.74V
  • Battery charge control is simply via STOP/START push buttons, allowing battery interchange without the need to remove power from the unit or connecting/disconnecting live output
  • 10.0A Resettable circuit breakers are fitted to each battery connection to protect both the battery and the unit from short circuits or faults
  • The unit is reverse connection protected and will show an error condition if START is pressed while battery reverse connection is made
  • The unit detects non battery connection and will show an error if less than 0.8V is detected at the battery terminals
  • The unit will automatically perform a desulphation charge if a battery connected exhibits a terminal voltage less than 9.0V
  • Battery volts / amps and time is displayed on a three digit red 7 segment display
  • Display and Indicators brightness can be controlled from dim to very bright so display can be seen in daylight conditions
  • Clear indication of Bulk Charge, Trickle Charge, Desulphation Charge and Error conditions
  • 12kg (26lbs)
  • L. 37.3cm x W. 21.9cm x H. 24.5cm (L. 14.7 x W. 8.6 x H. 9.6 Inches)
  • The unit accepts a universal mains input of 80-264 VAC/47-63 Hz
  • The battery connecting lead is made via a non reversible 2 pin 50A connector
  • The unit is supplied with 2 lead sets per channel, 1 fitted with 8.0mm crimp terminals for connection to the SBSC11 battery, the other with crocodile or alligator clamps.
  • 1 Year RTB Warranty
  • Field calibration possible, no need to return the unit back to factory for calibration
Contact Us

Want to know more about this product?

Send us your questions and we will happily respond to you with our knowledge and expertise!
Contact Us